Feedback Control of a Hovercraft over a Wireless Link

Abstract :-
Nonlinear underactuated systems (i.e. systems with fewer control inputs than configuration variables) present significant challenges for automatic control. This thesis explores feedback control of an underactuated hovercraft over a wireless communication channel using techniques from nonlinear control theory. Continue reading Feedback Control of a Hovercraft over a Wireless Link

Structural Test bench Development for DSP Models

Abstract :-
The objective of this thesis is the development of a set of library models from which a structural test bench can be created. This thesis also describes creation of the structural test bench using the library of primitive components and Synopsis Graphical Environment, a conventional schematic capture tool. This approach has been implemented for two applications Continue reading Structural Test bench Development for DSP Models

Pre Paid Energy Meter With Microcontroller Programming

Abstract :-
In this project we show that how we interface the digital energy meter to the easy recharge unit and convert this meter into prepaid energy meter. By using this technique we show that how we convert all meter with the prepaid logic. When any concept is prepaid then there is a security of misuse of electricity uses. Normally in every postpaid connection bill is much higher then the prepaid. Continue reading Pre Paid Energy Meter With Microcontroller Programming

TFT LCD with Resistive Touch Screen

Abstract :-
With the increasing popularity of smartphones and tablet computers, touch has become one of the most common user interfaces encountered today. For our final project design we have converted a number of open-source C++ libraries to C in order to interface with an LCD and touch screen via the Atmel ATmega644 microcontroller. In addition to these new libraries we included three pieces of software: a free drawing mode, a game called Yellow which pays homage to the arcade game Pac-Man© developed by Namco in 1980, and the classic pencil and paper game Tic-Tac-Toe. Each piece of software serves to demonstrate some of the many capabilities of the LCD and touch screen combination. Continue reading TFT LCD with Resistive Touch Screen

ECE Project on Car Alarm System

Abstract :-
The basic control functions for this system include monitoring inputs (such as sensors, push buttons, etc) and controlling output signals (such as sirens, lights, LEDs, etc). These functions are easily implementable in an embedded processor. 4414 Microcontroller is used in this project as it is best suited for security systems Continue reading ECE Project on Car Alarm System

Speed Control of DC Motor using Microcontroller 8051 with Circuit Diagram

The aim of developing this project is to control the speed of DC motor. The main advantage in using a DC motor is that the Speed-Torque relationship can be varied to almost any useful form. To achieve the speed control an electronic technique called Pulse Width Modulation is used which generates High and Low pulses. These pulses vary the speed in the motor. For the generation of these pulses a microcontroller (AT89c51) is used. As a microcontroller is used setting the speed ranges as per the requirement is easy which is done by changing the duty cycles time period in the program. Continue reading Speed Control of DC Motor using Microcontroller 8051 with Circuit Diagram